Configuring a global connection using Express Setup

  1. From Windows Start menu: Start > All Programs > EntraPass Global Edition > Server > Express Setup NCC. The system displays the Express setup window with a progress of the startup. Then Operator logon window appears.
  2. Enter your operator name and password to log on, and click OK. The Express Setup window displays on the screen.
  3. Select the Gateway and Reader type that is used in conjunction with the doors configured under this gateway.
  4. Click Next to continue.
  5. You can modify the Gateway name.
    • Specify the NCC connection type between the NCC and the gateway:
      • RS-232: Select if the NCC is installed on a separate computer than the gateway.
      • Integrated with gateway: Select if the NCC computer is the same as the gateway computer.
    • Specify the Number of controller loops (max: 8) on this gateway.
  6. Click Next to continue. The system displays the next window. Depending on the number of controller loops you have entered in the previous window, the system may display the next window more than once.
  7. Specify the connection name and the Number of controllers on this connection.
  8. Click on Next to continue. The system displays the next window. Depending on the number of controllers on the connection you have entered in the previous window, the system may display the next window more than once.
  9. Specify the Controller Name.
    • Specify if the Door configuration by defining if readers are located on the same door or on separate doors.
    • Select the appropriate Reader and Keypad option.
    • Select the “define all relays and inputs” boxes if you want the system to automatically label (address) them.
  10. Click Next to continue.
  11. Specify the door names (primary and secondary language) and click “Finish” to end.
    Note: If you have more than one controller connection on the gateway, the system displays the last three windows until all of the controllers connections are defined.