1 - In the Intrusion tab, select a gateway from the gateway list.

2 - Depending on what you want to view, select one or all of the following component check boxes:

•  Partitions

•  Virtual keypads

•  Zones

The components associated with the selected gateway appear, with icons to indicate their status. When you select a component, the appropriate component actions appear in the top section of the Intrusion tab.

3 - Select one or all of the following three icons on the top section of the component appropriate to your requirements:

•  Pin: to pin the component to the beginning of the list.

•  Magnifying glass: to view a full status on the component.

•  Watch: to watch important events from the component.

Different component colors indicate the following states:

•  Gray: offline

•  Green: ready

•  Black, when a zone is in alarm and the system is not armed: not ready

•  Orange: armed with either entry or exit delays

•  Blue: armed

•  Red: in alarm

Note...

If an armed partition has a false alarm, and the zone returns to normal, the partition stays in the In alarm status until the partition is disarmed.
When a cardholder enters the first zone of an armed partition, the system activates the entry delay.

 

Select a partition, and the following partition actions appear in the top section:

•  Partition armed away: to arm the area when all cardholders leave the area.

•  Partition armed stay: to arm the perimeter of the area while cardholders remain in the area.

•  Partition armed no entry delay: to arm the area when no one else will enter the area.

•  Partition armed with code: to use a code to arm the site.

•  Disarm partition with code: to use a code to disarm the site.

Note...

If a button is unavailable, it means the partition is already in that state.

 

In addition to the above partition actions, the following actions are available in the context menu. Right-click the partition to view the following action:

•  Full status: provides a summary of the current actions defined for the partition.

Select a partition, and the following partition actions appear in the top section:

•  Partition armed with code

•  Disarm partition with code

•  Output 1 Toggle

•  Output 2 Toggle

•  Output 3 Toggle

•  Output 4 Toggle

•  Output 5 Toggle

•  Output 6 Toggle

•  Output 7 Toggle

•  Output 8 Toggle

Note...

If a button is unavailable, it means the partition is already in that state.

In addition to the above partition actions, the following actions are available in the context menu. Right-click the partition to view the following actions:

•  Full status: provides a summary of the current actions defined for the partition.

Select a keypad, and a Keypad button appears in the top section:

1 - To use the virtual keypad, click the Virtual keypad button.

2 - When finished, click the Exit button on the virtual keypad.

Select a zone, and the following zone actions appear in the top section:

•  Zone bypass: to exclude a specific zone before arming the system.

•  Zone unbypass: to clear a bypass.

Note...

If a button is unavailable, it means the zone is already in that state.

In addition to the above zone actions, the following actions are available in the context menu. Right-click the zone to view the following actions:

•  Full status: provides a summary of the current actions defined for the zone.