Building a task with a trigger value variable

  1. On the Definition tab, click Task Builder.
  2. Click New and enter Trigger value as the task name.
  3. Click Command.
  4. In the SmartLink Task Builder window, from the Component type list, select Relay.
  5. From the Command list, select Toggle relay activation.
  6. From the Variable list, select Trigger variable #1. The task displays at the bottom of the window.
  7. Click OK. The SmartLink task now displays in the text field.
  8. Click Save and close the Task Builder window.
  9. On the Definition tab, select Event Trigger.
  10. Click New and enter Trigger value as the event trigger name.
  11. In the Trigger source area, from the component type list, select Door.
  12. Click the Three dot icon to select the component.
    Note: You can also select a group of components or all of the components as a trigger source.
  13. Click the Three dot icon to select Always valid as the Trigger schedule.
  14. Select the Use extended filter option.
  15. In the Trigger destination area, click the Three dot icon to select the SmartLink.
  16. Click the Three dot icon to select Trigger value as the task.
  17. Select the Use task variable option.
  18. On the Events tab, select the Access granted event.
  19. Click Save .
  20. Click the Variable tab.
  21. Select Relay for both as the variable type.
  22. Click the Extended filter tab.
  23. Select Card as the Filter type, and select the component filter and both variables.
  24. Repeat Step 23 for as many cards as required.
  25. Click Save and click Close.