button to display relays as icons in the working
area.
Use this menu to manually change the state of a relay or group of relays. You can activate/deactivate and temporarily activate relays or group of relays manually. The window will also display, in real‐time, the status of the selected relay(s). It allows to manually turn off a relay; for example, when an input programmed to activate a relay goes into alarm in unknown conditions.
§ This panel displays the existing sites in a drop-down list.
§ Use the Filter... textbox to sort the relays according to the characters string you have entered.
§ The working area displays all the relays associated to the selected site.
§ Activate: Click this button or use a right-click on a relay and select Activate from the contextual menu to activate a relay which was previously deactivated by an operator, event, schedule or input in alarm.
§ Deactivate: Click this button or use a right-click on a relay and select Deactivate from the contextual menu to allow an operator to deactivate a relay which was previously activated by an operator, event, schedule or input in alarm.
§ Temporary Activate: Click this button or use a right-click on a relay and select Temporary Activate from the contextual menu to temporarily activate a relay or group of relays for a preset delay.
§ Set Back To Schedule: Click this button or use a right-click on a relay and select Set Back To Schedule from the contextual menu to reapply a schedule after a manual operation was performed on a component.
§ Icons display mode: Click
the button to display relays as icons in the working
area.
§ List display mode: Click
the 
button to display relays in a list in the working
area.
§ WatchList button: If a component is "watched", it will be displayed in this list.
§ Zoom buttons: Use the
and 
buttons
at the bottom right corner of the window to make a zoom out or zoom in
of the time scale.