This menu is used to define the door parameters on which readers and/or keypads are installed. A door can be a In/Out door, an entry door for anti‐passback, an exit door for anti‐passback or an access door. It depends on how the settings are programmed. The controlled door may be secured at all times or only during defined schedules. The common locking devices used are electric door strikes and electromagnetic locks. A door may be equipped with one or two readers; one reader on each side. For doors equipped with two readers, the outer reader has to be defined as an entry reader and the inner reader as an exit reader.
§ This panel contains a list of sites with their controllers.
§ Use the Filter... textbox to sort the list of sites according the characters string you have entered.
§ The working area contains the door selected from the left panel. You can display the doors associated to a single controller or to a whole site.
§ Edit button: Click the Edit button to configure the selected door parameters (see Door Setup for more details). You can also right click on a door and select Edit from the contextual menu.
§ Delete button: Click the Delete button to delete the selected door from the list. You can also right click on a door and select Delete from the contextual menu.
§ Icons display mode: Click
the 
button to display doors as icons in the working
area.
§ List display mode: Click
the 
button to display doors in a list in the working
area.
§ WatchList button:
§ Zoom buttons: Use the
and 
buttons
to make a zoom out or zoom in of the time scale.