Operation Intrusion

Use this menu to manually change the state of an integrated component. The window will also display, in real‐time, the status of the displayed components.

Note

Only DSC MaxSys, NEO and PowerSeries panels are supported in EntraPass Web.

Top Panel

• This panel displays the existing gateways in a drop-down list.

• Use the Filter... textbox to sort the gateways according to the characters string you have entered.

• Select the components to be displayed in the working area by clicking the corresponding button (becomes blue when selected). These buttons are used as filters. The system will remember the selection for each operator.

• Click the button to display components as icons in the working area.

• Click the button to display components in a list in the working area.

Note

Selection of multiple items can only be done when at least one filter is selected.

Component Status Icons
	Description	EntraPass Icon	Web and Go Icon
Full Status Text	In Alarm
	In Alarm (disarmed)
	Armed
	Armed Stay
	Armed Exit Delay
	Armed Entry Delay
	Ready
	Not Ready
	Unknown/Not Connected
Panel Condition	ByPass
	Alarm
	Tamper
	Fault
	Open
	No information from the panel
	OK
	Not connected

Note...

You can use CTRL and SHIFT keys with the left mouse button to make multiple selections.

Working Area

The working area displays all the components linked to the selected gateway with their actual status indicated by an appropriate icon (see previous table).

You can perform manual operations on a component using a right click or the top right buttons (see next section).

• Zones: The zones status are displayed through different icons (see previous table).

• Partitions (for NEO and PowerSeries panels): The following operations are available for partitions

○ Partition Arm Away

○ Partition Arm Stay

○ Partition Arm No Entry Delay

○ Partition Arm With Code

○ Disarm Partition With Code

• Partitions (for MaxSys panels): The following operations are available for partitions