Programming KT-2252 elevator controllers

The Elevator tab allows you to specify which auxiliary devices are used with the KT-200 for elevator control and how they are used. Depending on the expansion board installed and on the option checked, the Elevator window displays the REB-8 Installed or KT-2252 Installed section.

  1. From the Controller definition window, select the KT-200 tab.
  2. In the Auxiliary devices section, select KT-2252 elevator controller , or KT-2252 elevator controller and REB-8 relay . The Elevator tab appears.
  3. To configure elevator controllers, select the Elevator tab. When KT-2252 elevator controllers are used, the Elevator mode section is enabled.
  4. In the Elevator mode section, check the appropriate number of floors. This indicates how the floors are controlled with the KT-2252.
    • Select 16 Floors if there is one KT-2252 for two cabs sharing the same floors.
    • Select 32 Floors if there is one KT-2252 per cab.
      Note: The Inputs column refers to the KT-2252 terminals. When floors have been defined (in the Floor menu), the Floors column contains the floors that are associated with the inputs.
    • In the KT-2252 installed section, specify the number of KT-2252 installed. The options are cumulative. If for example the KT-2252 #3 option is checked, KT-2252 #1 & 2 have to be checked as well. The following table summarizes how KT-2252 elevator controllers are used:
      Table 1. KT-2252 elevator controllers
      Number of Cabs Number of Floors Number of KT-2252
      1 8 1
      1 16 1
      1 32 1
      1 64 2
      2 8 1
      2 16 1
      2 32 2
      2 64 4
  5. In the Floors column, select the floors associated with KT-2252 controller terminals.
    Note: The Inputs column refers to the KT-2252 terminals. When floors have been defined (in the Floor menu), the Floors column contains the floors associated with the inputs.