Enable Exit Reader

This feature is to bring up the number of readers to 8 (on 4 doors) for KT-400 and KT-401 controllers (only) when using ioProx XSF or IoProx UK 31 bits readers. This way, a second reader can be connected to the controller. That second reader will keep the same values as the first one for:

  • Door lock mode
  • Unlock time
  • Open time
  • Extended Unlock time
  • Extended Open time
  • Unlock Schedule
  • Video View
  • Graphic
  • All “Door Contact” features
  • Relay Activation for Door events except “Door forced open”

The second door will automatically be labelled with the first door name plus the word EXIT at the end.

  1. From the KT-400 tab, under Enable exit reader, select the doors for which the reader has to be enabled.
  2. Click Save.
    Note:
    • The feature is available only when IoProx XSF or IoProx UK 31-Bit readers are used under General/Reader and keypad. If another type of reader is selected, the option is not available.
    • A number of option fields are not available for the 2nd reader since values are already programmed in the first one.
    • If you deselect the exit reader under controller, the exit reader will be disabled. It is not possible to DELETE an exit reader.