Manual operations on relays

Use this menu to manually change the state of a relay or group of relays. You can activate/deactivate and temporarily activate relays or group of relays manually. The window will also display, in real-time, the status of the selected relay(s).

This feature allows to manually turn off a relay; for example, when an input programmed to activate a relay goes in alarm in unknown conditions.

Table 1. Relay icons
Icon Definition
"relayicon.png"
Deactivate relay: allows an operator to deactivate a relay which was pre­viously activated by an operator, event, schedule or input in alarm.
"relay2icon.png"
Activate relay: activate a relay which was previously deactivated by an operator, event, schedule or input in alarm.
"temporalrelay.png"
Temporarily activated relay: Temporarily activate a relay or group of relays for a preset delay.
"Icon_Return_to_Schedule_GE.png"
Return to schedule: Will re-apply a schedule after a manual operation was performed on a component.
Note: A hint is displayed when you move your cursor over a button. It gives details about the operation to be performed.