Configuring door events (multi-site gateway only)

  1. In the Door window, select the Door events tab. This is to define the relays (or relay groups) that are to be activated on specified events. However, when you are using a controller other than KT-400, this tab is used to define relays only.
  2. Select the relay that is activated locally for each event .
  3. Pager call type (applies to KTES only): You can select Do not call (the relay activation for that event is not sent to the pager), Call immediately (the relay activation for that event is immediately to the pager) or Call when scheduled (the relay activation for that eventis sent to the pager according to the pager call schedule). Default value is Do not call.
    Note: To specify pager call types for each events, the Pager reporting function must be enabled. See KTES Configuration.
  4. Once all door event features have been set, select the Access events tab to define relays (or relay groups if you are using KT-400) that are to be activated on miscellaneous events.
    Note: EntraPass offers you the ability to define a relay that will be activated if the Extended delay feature is used. The card used must be defined with this feature. Only KT-100, KT-300, KT-400 and KTES can be configured with the Extended door access delay feature.
  5. Select the relay that will be activated locally or the relay group (if you are using KT-400) for each event .
  6. Pager call type (applies to KTES only): You can select Do not call (the relay activation for that event will not be sent to the pager), Call immediately (the relay activation for that event will be sent immediately to the pager) or Call when scheduled (the relay activation for that event will be sent to the pager according to the pager call schedule). Default value is Do not call .
    Note: To specify pager call types for each events, the Pager reporting function must be enabled. See KTES Configuration.