•  This panel displays the connections associated with the gateway selected from the drop-down list.

•  Use the Filter... textbox to sort the list  of connections according the characters string you have entered.

•  The working area contains the controllers associated to the selected connection. Use a right-click to perform actions on controllers (see next section for details)

•  Add button: Click the Add button to add a new connection to the gateway.

•  Edit button: Click the Edit button to configure the selected connection parameters or use a right-click and select EditConnection from the contextual menu.

•  Save As button: Click the Save As button to make a duplicate the selected connection or use a right-click and select Clone Connection from the contextual menu..

•  Delete button: Click the Delete button to delete the selected connection from the list or use a right-click and select Delete Connection from the contextual menu.

Note...

See Connection Setup for more details.

Controllers provide audiovisual feedback on the access decision. Typically, a red/green light (LED) indicator on the reader informs the cardholder that the door is unlocked or that access has been denied. A local door alarm can be installed to provide an audible warning if the door is forced open or remains open after an access. The controller definition tells the system how a controller is being used and what devices are associated with it: (doors, input zones and relays). Controllers may be defined during a connection configuration. EntraPass Web supports five types of controllers: KT‐100, KT‐200, KT‐300, KT‐400 and KT-1. These provide the ability to activate local functions associated with a controller.

•  Add Controller button: Click the Add Controller button to add a new controller to the selected connection with the Express Setup wizard.

•  Edit advanced settings button:  Click the Edit advanced settings button to edit the controller's parameters or use a right-click and select Edit Controller from the contextual menu (see Controller Advanced Settings for more details).

•  Delete button: Click the Delete button to delete the selected controller from the list or use a right-click and select Delete Controller from the contextual menu.

•  Firmware button: Click the Firmware button to update the current firmware of the controller. This is only be available if the operator has the rights to update the firmware, if the controller is online and if the current firmware is different from the available firmware update.

•  WatchList button: If a component is "watched", it will be displayed in this list.

•  Zoom buttons: Use the and buttons to make a zoom out or zoom in of the time scale.