If a KT-1 or KT-400 controller is selected the Wireless Lock option will be available. Wireless locks use Kantech's licensed door feature. Using this button you can configure wireless locks.

The following options are displayed to configure your wireless lock.

• the wireless lock model
• the number of door licenses you have purchased
• the number of door licenses you have remaining

To add a wireless lock click Add. The add button will only be available if the number of remaining doors is greater than zero. A Device ID is required. The Device ID must be the same ID used to connect the lock to it's hub.

Wireless lock details are displayed on a table. The table includes the following.

• the device number
• the door name
• the device ID
• door contact check box
• REX check box

Wireless locks can only be deleted from this menu, they cannot be deleted from the doors menu.

The KT-1 supports 2 wireless locks. The KT-400 supports 8 wireless locks.

•  Encryption Key: Enter a 16‐Digit hexadecimal code to secure your connection.

•  Enable KT-Finder diagnostic for IP Device: Check this box if you want to use the KT‐Finder as a configuration and troubleshooting tool.

•  Override Gateway IP Address: Select the checkbox and enter the following parameters:

○  Domain Name: Enter the computer or the workgroup from which the EntraPass Server is a member. Once you have entered the domain name, click on the Test DNS button. This should display the corresponding IP address.

○  IP Address: Enter an IP address.

1 - You can select or deselect the Enable Connection checkbox.

2 - Once your connection configuration is complete, click Save or Cancel to return to the Connections window.