KTES-Edit Advanced Settings

The Kantech Telephone Entry System (KTES) is a telephone entry system that is suited for small and large applications with a separate access control system, or in applications that require telephone entry access only. This system provides visitor access control for a variety of applications: apartment buildings, gated communities, condominiums, office buildings, factories, and industrial sites. Visitors use the KTES to communicate directly with a tenant and are easily identified by voice communication. The tenant can grant or deny the visitor access directly from a telephone land line or a cellular phone. Designed as a stand‐alone unit, the system controls one door, auxiliary relay, and supports postal lock access. For larger commercial installations, the KTES integrates with EntraPass Web through a Multi‐site Gateway and KT‐controllers to provide a complete access control solution. The entire programming of the system can be done directly on the keypad or remotely from a PC via EntraPass Web. The system reports all events directly to EntraPass, where you can obtain a detailed event log. Additionally, programmed alarms can be reported to a pager and/or to the EntraPass system via an integrated modem. For more information on the KTES, please refer to the KTES Installation Manual, DN1769 and the KTES Programming Manual, DN1770.

1 - Click in the textbox at the top left corner and change the KTES' name.

2 - Connection: This is the connection for which the KTES is assigned.

3 - Tenant List Capacity: By default, the capacity is 250 tenants unless you have registered for 3000 tenants total.

4 - Serial number: The serial number is unique to each KTES. It is used for communication between the KTES and the EntraPass software. Default value is 00000000.

5 - EOL resistor type: This parameter defines the input termination as None for no end‐of‐line resistor (dry contact), Single for single end‐of‐line resistor (5.6K) or Double for double end‐of‐line resistor (2 * 5.6K). Default value is None.

6 - Tenant List: Select a tenants list from the drop-down list. Default value is empty.

7 - Map: Select a map from the drop-down list.

8 - Video View: Select a video view from the drop-down list.

Access

•  Reader Type: This is the Wiegand Interface output format to be sent to the KTES. Default value is Kantech XSF.

Relay Activation

•  Heater Kit Relay: Relay that will be activated when cabinet inside temperature falls below +5oC. Default value is none.

Postal Lock

1 - Input: This is the input corresponding to the door postal lock (0 to 4). Select an input and click OK.

2 - Schedule: This is the schedule inside which the input, corresponding to the postal lock, generates a valid postal lock request when that input is in alarm.

3 - Relay: Relay that will be activated with an entry request from the front door postal lock. Default value is none.

4 - Link With user: To link a user to the postal lock, click the Link With user button. Click the Select button and select a user. You can also leave the checkbox unselected and enter a Card Number.

Visitor Call Setting

1 - Keypad key for access granted by tenant: This telephone key can be used by a tenant to grant access to a visitor. Default value is 9.

2 - Keypad key for access denied by tenant: This telephone key can be used by a tenant to deny access to a visitor. Default value is *.

3 - Keypad key for auxiliary relay by tenant: This telephone key can be used to grant access to a visitor that is using a secondary entrance. Default value is empty.

4 - Talk Time: This is the maximum talk duration in seconds for a normal call between a visitor and a tenant (10 secs to 59 min:59 secs). Default value is 40 secs.

•  Extended: This is the maximum talk duration in seconds for a extended call between a visitor and a tenant (10 secs to 59 min:59 secs). Default value is 60 secs.

•  Talk Time Remaining Warning: The system sends a warning ring (a beep sound), a certain number of seconds (depending on the value entered) to indicate the end of the allowed talking period (1 sec to 59 min:59 secs). Default value is 10 secs.

5 - Number of Rings Before Answer: This is the maximum number of rings allowed for a tenant to answer (4 to 16). Default value is 5.

•  Extended: This is the maximum number of rings allowed, for a tenant with the extended option, to answer (4 to 16). Default value is 10.